This model consists of a reactor, generator, standpipes, risers, and an air blower which forms the catalyst circulation system. The catalyst flow is controlled by the valves on the reactor and regenerator standpipes. Circulation fluidizing of the catalyst is achieved by injecting air into the air inlet of the regenerator, the steam inlet of the stripper and the feed inlet to the reactor riser and is controlled by three individual needle valves. Evaluations of start-up, operation, and shut down procedures in these units can be invaluable to educators, as demonstrations of catastrophic events may be safely simulated.
-Base enclosure approximately 25” X 18” X 12 ¼ ”
-Overall unit height approximately 44 ¼”
-Operates on 120 VAC-60 HZ